Last reviewed: May 17, 2026
Author: Jeff Steckler, OTD, OTR/L — Doctor of Occupational Therapy, Advanced Recovery Cryotherapy
What’s the best body composition scan? Depends on what you’re trying to measure.
Search “InBody scan near me” or “DEXA scan Modesto” and you’ll find dozens of opinions, mostly from whoever sells the scan they recommend. The honest answer is more boring: Fit3D, InBody, and DEXA each do different things well, and each get different things wrong. Picking the right one depends on the question you’re trying to answer.
If you just want your “real” body fat percentage, the three methods can disagree by 3 to 8 percentage points on the same person on the same day (PMID: 30589769). This guide walks through what each method measures, where it shines, and how to choose. ARC operates the Fit3D scanner in Modesto, so we’ll be transparent about why we chose it — and when something else would be a better fit.
The 3 main contenders
Fit3D (3D Optical Body Imaging)
Fit3D uses a rotating platform and infrared depth sensors to capture a 3D scan in 35 to 45 seconds. It produces a rotatable 3D avatar, a body fat percentage estimate, dozens of circumferences (chest, waist, hip, thigh, calf, arm), posture analysis, and a body-shape rating. Non-contact, non-invasive — no electrical current, no radiation, no fasting required. Tinsley and colleagues evaluated 3D optical methods and noted that measurement technique substantially influences the result, which is true of every body composition method (PMID: 31652381). Same machine, same technique, repeat trends are reliable.
InBody (Bioelectrical Impedance Analysis)
InBody uses bioelectrical impedance analysis (BIA) — a small electrical current passed through hand and foot electrodes. The device measures resistance and uses prediction equations to estimate body fat, lean mass, total body water, and segmental (per-limb) lean mass. A scan takes 30 to 60 seconds. Schoenfeld and colleagues compared multi-frequency BIA against DXA over a 10-week training program and found BIA tracked the direction of change reasonably well, though absolute values diverged from DXA (PMID: 30421803).
DEXA (Dual-Energy X-ray Absorptiometry)
DEXA (sometimes written DXA) uses two low-dose X-ray beams to differentiate bone, fat, and lean tissue. It’s the consumer-accessible reference standard for body composition and the only one of the three that directly measures regional bone density. A scan takes 6 to 10 minutes and involves a low dose of ionizing radiation. Bosy-Westphal’s review places DEXA as a clinical and research benchmark while noting 3D optical and BIA have practical advantages in routine tracking (PMID: 28704687).
Head-to-head accuracy comparison
“Accuracy” means two different things. Absolute accuracy is how close a single scan gets to the true value. Reliability for tracking change is how consistently the device reports a real change across repeat scans on the same person. They’re not the same. Heymsfield’s review makes the point — every method carries measurement error, and the practical question is whether the device is precise enough to detect meaningful change over time (PMID: 30589769). For most wellness clients, tracking change matters more than nailing an absolute number.
| Method | Mechanism | Body Fat % Accuracy (Single Snapshot) | Lean Mass Accuracy | Tracks Change Reliably (Same Device) | Visual Image Output | Radiation Exposure | Typical Cost (as of 2026) | Accessibility in Modesto |
|---|---|---|---|---|---|---|---|---|
| Fit3D | 3D optical scan + circumference modeling | Estimated; comparable class to BIA | Whole-body estimate from volume model | Yes, with consistent protocol | Yes — 3D avatar + posture | None | $30–$50 per scan; lower in memberships | Available at ARC |
| InBody | Bioelectrical impedance (electrical current) | Estimated; hydration-dependent variation | Whole-body + segmental (per-limb) | Yes, with consistent hydration + timing | No | None | $20–$50 per scan | Available at some Modesto gyms |
| DEXA | Dual-energy X-ray | Reference-standard class for fat mass | Reference-standard class | Yes; smallest detectable change of the three | 2D scan map (not 3D photo) | Low-dose ionizing | $90–$200 per scan | Bay Area imaging centers; 90+ min drive |
Schoenfeld’s training study supports the tracking-change column — both BIA and DXA detected the direction of lean mass gains, though absolute magnitudes differed (PMID: 30421803). Pick one device, scan under the same conditions every time, and trust the trend more than any single absolute number.
What each method actually does well
Fit3D — Visual body shape. The 3D avatar rotates, compares side-by-side with prior scans, and captures three-dimensional change a number can’t. It auto-extracts dozens of circumferences (waist, hip, thigh, biceps, calves), which matters when the scale doesn’t move but the shape does. It also outputs a posture screen — shoulder height, head-forward, hip alignment — useful as a trend tool alongside the work in our wellness center.
InBody — Segmental lean mass. Separate readings for each arm, each leg, and trunk. For athletes returning from a one-sided injury or anyone monitoring asymmetric muscle development, that data is genuinely useful. It’s also fast, cheap, and widely available. Bosy-Westphal’s overview notes BIA’s practical advantages for high-frequency tracking exactly because of these factors (PMID: 28704687).
DEXA — Regional precision and bone density. It’s the only one of the three that meaningfully evaluates bone mineral density, which matters clinically for osteoporosis screening, post-menopausal women, and athletes with relative energy deficiency. Its precision for detecting small changes is also the best of the three, which is why research studies use it as the comparator (PMID: 31412567).
What each method gets wrong
Fit3D — Optical and surface-only. It does not directly measure visceral (organ-area) fat — only estimates total body fat from the volume model. It also depends on consistent scanning posture and tight-fitting clothing. A loose t-shirt or different posture can shift circumferences. Same outfit, same protocol — but a real limitation if the protocol slips.
InBody — Hydration is everything. If you’re dehydrated, just finished a workout, just drank a liter of water, or scan in the evening versus the morning, the body fat estimate can swing 3 to 8 percentage points without your body actually changing. Schoenfeld’s 10-week comparison found multi-frequency BIA tracked direction reasonably well, but absolute values diverged from DXA (PMID: 30421803). With a tight protocol, BIA is a reliable trend tool. Without one, it’s noise.
DEXA — Cost, radiation, and access friction. DEXA exposes you to a small dose of ionizing radiation (much lower than a chest X-ray, but nonzero). Cost runs higher and access is limited — most Modesto residents drive 90+ minutes to a Bay Area imaging center for a recreational body comp DEXA. For monthly tracking the friction usually isn’t worth it. For a one-time clinical question, it can be.
Why ARC uses Fit3D
When we evaluated body composition tools for our wellness center, we weren’t looking for the “most accurate body fat percentage.” That framing doesn’t actually exist — the three methods differ by 3 to 8 percentage points on the same person. We were looking for the best fit for the use case our clients actually have: monthly tracking of body shape, circumferences, and posture across a wellness, recovery, or weight-loss program.
Fit3D fit. The 3D avatar gives clients a memorable progress record a printout number doesn’t. The circumferences are especially useful for clients running combined cryotherapy, infrared, and recovery protocols where shape change can outpace scale change. And the scan is non-contact and radiation-free, which makes monthly cadence reasonable across general populations — post-surgical clients, perimenopausal women, athletes in training blocks. What Fit3D is not for: a single clinical-grade body fat measurement or a bone density evaluation. For those, DEXA is the right tool. We say so on our Fit3D service page and on a phone call. Picking the right tool matters more than picking the “best” one.
Which scan should you choose?
- Medical-grade single snapshot for a specific clinical question (bone density, osteoporosis screening, baseline reference). → DEXA at a Bay Area imaging center.
- Fast monthly tracking on the same device across a wellness or weight-loss program. → Either Fit3D or InBody. Both are reliable for trends within a single device. Pick the more accessible one, lock the protocol, stop comparing across methods.
- Visual progress photos that capture three-dimensional body-shape change. → Fit3D.
- Segmental lean mass — per-arm, per-leg readings for asymmetry or return-from-injury. → InBody.
- Regional bone density alongside body composition. → DEXA.
- Optimize body composition across a full wellness program, not just measure it. → The measurement is one input. Pair it with recovery, training, and metabolic-health work. See our Weight Loss & Body Composition page, or our Athletic Recovery page if the goal is training-block performance.
Worth saying out loud: body composition measurement isn’t for everyone. If a monthly number is going to drive anxiety without changing your behavior, skip it.
In Modesto, where to get each
Fit3D is available at ARC — the scanner lives inside our 4660 Spyres Way facility, bookable as a standalone appointment or add-on to a wellness or recovery visit.
InBody is available at multiple Modesto gyms and wellness clinics. Call around, ask which model they have, and ask whether they enforce a scan protocol around hydration and timing. The protocol matters more than the device.
DEXA is not, to our knowledge, available for recreational body composition in Modesto itself. Most clients drive to a Bay Area imaging center. Some Central Valley endocrinology and orthopedic offices operate DEXA for clinical bone density referrals, but those aren’t typically booked as walk-in body comp scans.
FAQs
Is InBody accurate?
For trends on the same device under a consistent protocol, yes — multi-frequency BIA has been validated as a reasonable change-detection tool (PMID: 30421803). For a single absolute body fat percentage compared against DEXA, less so — readings depend heavily on hydration and time of day. Scan at the same time of day, same hydration state, every time.
How often should I scan?
For active body recomposition — monthly is reasonable. Scanning more often introduces too much measurement noise relative to actual physiological change. For general wellness tracking — quarterly is plenty.
Does Fit3D show body fat percentage?
Yes — Fit3D reports an estimated body fat percentage derived from its 3D volume model. That estimate falls in the same general class as a BIA estimate, and the absolute number may differ from what an InBody or DEXA would report on the same person on the same day. Trust the trend, not the cross-device comparison.
Do I need to fast for Fit3D?
No. Fit3D doesn’t depend on hydration or stomach contents the way BIA does. We do recommend form-fitting clothing and pulling long hair up so the 3D model captures your silhouette consistently.
Can I do all three?
You can, but it usually creates more confusion than insight — three methods produce three different body fat numbers on the same day, which makes it harder to tell whether the change between scans is real progress or cross-method noise. Pick one as your primary tracker. A periodic DEXA reference scan once or twice a year alongside a routine Fit3D or InBody trend is defensible. Mixing devices month-to-month is not.
How does cryotherapy or recovery work affect body composition tracking?
Cold exposure, infrared sessions, and intense training all shift acute body water and surface skin temperature, which can move the needle on a same-day BIA or Fit3D reading. Same protocol fix: same time of day, same recovery state, consistent window between your last training session and the scan. If you’re scanning inside our wellness center, we’ll help you set that protocol on visit one.
Is body composition tracking right for me?
For many wellness clients, yes — it gives you signal the bathroom scale doesn’t. For some, no — if a monthly body fat number is going to drive anxiety without changing your behavior, strength benchmarks, energy, clothing fit, or sleep quality may serve you better. If body recomposition is a genuine goal, our Weight Loss & Body Composition page walks through how we approach it.
Book a Fit3D baseline scan in Modesto
If Fit3D is the right fit — visual body shape tracking, circumference trends, posture screen, monthly cadence — we’d be glad to scan you.
Advanced Recovery Cryotherapy
4660 Spyres Way, Modesto, CA 95356
Phone: (209) 314-5828
Hours: Monday–Friday 9am–6pm, Saturday 9am–2pm
Book your first Fit3D scan or call to ask whether Fit3D, InBody, or DEXA fits your goals. If it’s not Fit3D, we’ll tell you.
References
- Tinsley GM, et al. (2019). Reliability and agreement between DXA-derived body volumes and their usage in 4-compartment body composition models. PMID: 31412567
- Tinsley GM, et al. (2019). Influence of measurement technique on body composition assessment by 3D optical imaging. PMID: 31652381
- Schoenfeld BJ, et al. (2018). Comparison of multiple-frequency bioelectrical impedance vs. dual-energy X-ray absorptiometry for assessing body composition changes after a 10-week resistance training program. J Strength Cond Res. PMID: 30421803
- Bosy-Westphal A, et al. (2017). Quantifying body composition: a review of new generation methods. Curr Opin Clin Nutr Metab Care. PMID: 28704687
- Heymsfield SB, et al. (2018). Body composition assessment: developments in research and clinical applications. PMID: 30589769